|
IntelliCarb™ Compensating Carburetor measures air on clean side of air filter and adjusts metering diaphragm in carburetor. Keeps RPM levels even when filter begins to clog.
Easy-Access Carburetor Adjustment Screws let you adjust the carburetor for local cutting conditions and altitude.
Smooth Clean Design has no rough edges to snag on clothing or brush.
A Second Braking System (Q) reduces the risk of injury in some circumstances if so equipped.
Rear Hand Guard reduces the risk of injury, as well as providing wide area for foot placement during starting.
High-Tech Polymer Housings are lightweight, withstand greater impact, and are corrosion-resistant.
Inboard Chain Brake requires less maintenance and makes sprocket easier to remove.
Sprocket Cover is streamlined to reduce clogging and is easy to clean.
Front Handle is covered for a secure grip and ergonomically angled for comfort. (Heated handle available on STIHL Arctic™ versions)
Front Hand Guard reduces the risk of injury.
STIHL Quickstop® Chain Brake System is designed to stop the chain in fractions of a second. Can be manually activated or activated by inertia, if the kickback force is sufficient.
Automatic Bar and Chain Oiler lets operator concentrate on cutting, not on bar lubrication.
Quick Chain Adjuster (B) is a toolless chain adjuster (not on all models).
|
Chain Catcher helps reduce the risk of operator contact by a chain if it should break or derail.
Anti-Vibration System helps reduce operator fatigue.
STIHL OILOMATIC® Saw Chain. STIHL makes its own saw chain.
Ematic™ Bar includes a polymer ramp reservoir which holds bar oil until it can be picked up by passing chain. This can reduce oil usage by up to 50%.
Bumper Spikes provide better control, making cutting easier.
Spark Arrestor Muffler has large baffles which reduce noise level and contain a screen designed to reduce the emission of sparks.
Toolless Fuel and Oil Caps require no tools to open or tighten. Cap retainers help keep cap from being lost.
Protected Spark Plug – protected, yet easy to change.
Large Starting Handle is easy to grip.
Air Filter Cover is easy to remove without tools for fast and easy filter cleaning or replacement.
Master Control Lever™ is a single lever operating the choke, starting throttle lock and on-off switch.
Throttle Trigger Interlock must be depressed before the trigger can be activated.
Translucent Fuel Tank allows operator to easily check fuel level before starting work.
|
|
Additional Features
|
|
|
2-Ring Pistons improve engine efficiency and hold compression longer than 1-ring pistons. They transfer heat from the piston to cylinder better, helping engine stay cooler and last longer.
Decompression Valve makes starting easier.
Easy2Start™ System (E) reduces resistance – eliminating the need for a strong, fast pull of the starting cord. Available on some models.
Electronic Ignition provides easier starting and smoother running.
Heavy-Duty Centrifugal Clutch is designed to reduce slippage.
Long Life Cylinders give maximum wear life, better cooling and lubrication for more power output per cubic centimeter of engine displacement.
Purge Pump Primer lets you prime the carburetor without flooding it. Standard on some models.
Replaceable “In Tank” Fuel Filters lower cost and are easy to maintain.
ElastoStart™ Handle has built-in shock absorber for smoother starting.
|
|
|
Chain Saw Comparison Chart
|
|
|
|
|
|
|
|
|
|
|
MODEL
|
DISPLACEMENT
|
ENGINE POWER
|
POWERHEAD WEIGHT
|
FUEL CAPACITY
|
CHAIN OIL CAPACITY
|
OILOMATIC® CHAIN
|
GUIDE BARS AVAILABLE
|
RECOMMENDEDGUIDE BAR
|
RECOMMENDED SAW CHAIN
|
|
Occasional Use Chain Saws
|
|
|
|
|
|
|
|
|
|
|
MS 170
|
30.1 cc(1.84 c.i.)
|
1.3 kW (1.7 bhp)
|
3.9 kg(8.6 lbs.)
|
250 cc(8.5 oz.)
|
145 cc(4.9 oz.)
|
3/8" PMN
|
30 to 40 cm(12" to 16")
|
14"3005 000 3909
|
#398261 PMN 50
|
|
MS 180 C-B
|
31.8 cc(1.94 c.i.)
|
1.5 kW (2.0 bhp)
|
4.0 kg(8.8 lbs.)
|
250 cc(8.5 oz.)
|
145 cc(4.9 oz.)
|
3/8" PMN
|
30 to 40 cm(12" to 16")
|
14"3005 000 3909
|
#398261 PMN 50
|
|
MS 180 C-BE
|
31.8 cc(1.94 c.i.)
|
1.5 kW (2.0 bhp)
|
4.2 kg(9.3 lbs.)
|
250 cc(8.5 oz.)
|
145 cc(4.9 oz.)
|
3/8" PMN
|
30 to 40 cm(12" to 16")
|
14"3005 000 3909
|
#398261 PMN 50
|
|
MS 210
|
35.2 cc(2.15 c.i.)
|
1.5 kW (2.0 bhp)
|
4.4 kg(9.7 lbs.)
|
470 cc(15.9 oz.)
|
200 cc(6.8 oz.)
|
3/8" PMC3
|
30 to 40 cm(12" to 16")
|
16"3005 000 4813
|
#363663 PMC3 55
|
|
MS 210 C-BE
|
35.2 cc(2.15 c.i.)
|
1.5 kW (2.0 bhp)
|
4.8 kg( 10.6 lbs.)
|
470 cc(15.9 oz.)
|
200 cc(6.8 oz.)
|
3/8" PMC3
|
30 to 40 cm(12" to 16")
|
16"3005 000 4813
|
#363663 PMC3 55
|
|
MS 230
|
40.2 cc(2.45 c.i.)
|
1.9 kW (2.5 bhp)
|
4.8 kg( 10.6 lbs.)
|
470 cc(15.9 oz.)
|
200 cc(6.8 oz.)
|
.325" RMC3
|
35 to 45 cm(14" to 18")
|
16"3005 000 4713
|
#363426 RMC3 62
|
|
MS 230 C-BE
|
40.2 cc(2.45 c.i.)
|
1.9 kW (2.5 bhp)
|
4.9 kg( 10.8 lbs.)
|
470 cc(15.9 oz.)
|
200 cc(6.8 oz.)
|
.325" RMC3
|
35 to 45 cm(14" to 18")
|
16"3005 000 4713
|
#363426 RMC3 62
|
|
MS 250
|
45.4 cc(2.77 c.i.)
|
2.2 kW (3.0 bhp)
|
4.6 kg( 10.1 lbs.)
|
470 cc(15.9 oz.)
|
200 cc(6.8 oz.)
|
.325" RMC3
|
40 to 45 cm(16" to 18")
|
16"3005 000 4713
|
#363426 RMC3 62
|
|
MS 250 C-BE
|
45.4 cc(2.77 c.i.)
|
2.2 kW (3.0 bhp)
|
4.9 kg(10.8 lbs.)
|
470 cc(15.9 oz.)
|
200 cc(6.8 oz.)
|
.325" RMC3
|
40 to 45 cm(16" to 18")
|
16"3005 000 4713
|
#363426 RMC3 62
|
|
Mid-Range Chain Saws
|
|
|
|
|
|
|
|
|
|
|
MS 270
|
50.0 cc(3.05 c.i.)
|
2.5 kW (3.4 bhp)
|
5.3 kg(11.7 lbs.)
|
520 cc(17.6 oz.)
|
280 cc(9.5 oz.)
|
.325" RMC3
|
40 to 50 cm(16" to 20")
|
16"3003 000 6813
|
#363426 RMC3 67
|
|
MS 270 C-B
|
50.0 cc(3.05 c.i.)
|
2.5 kW (3.4 bhp)
|
5.4 kg (11.9 lbs.)
|
520 cc(17.6 oz.)
|
280 cc(9.5 oz.)
|
.325" RMC3
|
40 to 50 cm(16" to 20")
|
16"3003 000 6813
|
#363426 RMC3 67
|
|
MS 280
|
54.7 cc(3.34 c.i.)
|
2.7 kW (3.6 bhp)
|
5.3 kg(11.7 lbs.)
|
520 cc(17.6 oz.)
|
280 cc(9.5 oz.)
|
.325" RMC3
|
40 to 50 cm(16" to 20")
|
16"3003 000 6813
|
#363426 RMC3 67
|
|
MS 280 C-BQ
|
54.7 cc(3.34 c.i.)
|
2.7 kW (3.6 bhp)
|
5.5 kg(12.1 lbs.)
|
520 cc(17.6 oz.)
|
280 cc(9.5 oz.)
|
.325" RMC3
|
40 to 50 cm(16" to 30")
|
16"3003 000 6813
|
#363426 RMC3 67
|
|
MS 290
|
56.5 cc(3.45 c.i.)
|
2.8 kW (3.8 bhp)
|
5.9 kg(13.0 lbs.)
|
560 cc(18.9 oz.)
|
330 cc(11.2 oz.)
|
.325" RMC3, 3/8" RMC3
|
40 to 50 cm(16" to 20")
|
16"3003-002-7013
|
#363426 RMC3 67
|
|
MS 310
|
59.0 cc(3.6 c.i.)
|
3.0 kW (4.0 bhp)
|
5.9 kg(13.0 lbs.)
|
560 cc(18.9 oz.)
|
330 cc(11.2 oz.)
|
3/8" RSC3
|
40 to 50 cm(16" to 20")
|
16"3003 000 8913
|
#362433 RSC3 60
|
|
MS 390
|
64.1 cc(3.9 c.i.)
|
3.2 kW (4.3 bhp)
|
5.9 kg(13.0 lbs.)
|
560 cc(18.9 oz.)
|
330 cc(11.2 oz.)
|
3/8" RMC3
|
40 to 63 cm(16" to 25")
|
20"3003 000 8921
|
#362433 RSC3 72
|
|
Professional Chain Saws
|
|
|
|
|
|
|
|
|
|
|
MS 200
|
35.2 cc(2.15 c.i.)
|
1.6 kW (2.1 bhp)
|
3.8 kg(8.4 lbs.)
|
370 cc(12.5 oz.)
|
240 cc(8.1 oz.)
|
3/8" PMC3
|
30 to 40 cm(12" to 16")
|
14"3005 000 7409
|
#363663 PMC3 50
|
|
MS 260
|
50.2 cc(3.06 c.i.)
|
2.4 kW (3.2 bhp)
|
4.8 kg(10.6 lbs.)
|
460 cc(15.6 oz.)
|
290 cc(9.8 oz.)
|
.325" RMC3, 3/8" RSC3
|
40 to 50 cm(16" to 20")
|
20"3003 000 6813
|
#363426 RMC3 67
|
|
MS 260 Pro
|
50.2 cc(3.06 c.i.)
|
2.4 kW (3.2 bhp)
|
4.8 kg(10.6 lbs.)
|
460 cc(15.6 ox)
|
290 cc(9.8 oz.)
|
.325" RMC3, 3/8" RSC3
|
40 to 50 cm(16" to 20")
|
20"3003 000 6813
|
#363426 RMC3 67
|
|
MS 361
|
59.0 cc(3.6 c.i.)
|
3.3 kW (4.4 bhp)
|
5.6 kg(12.3 lbs.)
|
685 cc(23.2 oz.)
|
325 cc(11.0 oz.)
|
3/8" RMC3
|
40 to 63 cm(16" to 25")
|
20"3003 000 8921
|
#362433 RSC3 72
|
|
MS 361 C-Q
|
59.0 cc(3.6 c.i.)
|
3.3 kW (4.4 bhp)
|
5.7 kg(12.6 lbs.)
|
685 cc(23.2 oz.)
|
325 cc(11.0 oz.)
|
3/8" RMC3
|
40 to 63 cm(16" to 25")
|
20"3003 000 8921
|
#362433 RSC3 72
|
|
MS 361 C-B
|
59.0 cc (3.6 cu. in.)
|
3.3 kW(4.4 bhp)
|
5.6 kg(12.3 Ibs.)
|
685 cc (23.2 oz.)
|
325 cc(11.0 oz.)
|
3/8" RSC3
|
40 to 63 cm (16" to 25")
|
20"3003 000 8921
|
#362433 RSC3 72
|
|
MS 440STIHL Magnum™
|
70.7 cc(4.3 c.i.)
|
4.0 kW(5.4 bhp)
|
6.3 kg(13.9 lbs.)
|
780 cc (26.4 oz.)
|
275 cc(9.3 oz.)
|
3/8" RSC3
|
40 to 80 cm(16" to 32")
|
20"3003 000 8921
|
#362433 RSC3 72
|
|
MS 441STIHL Magnum™
|
70.7 cc(4.3 c.i.)
|
4.1 kW (5.5 bhp)
|
6.6 kg(14.6 lbs.)
|
725 cc (24.5 oz.)
|
360 cc (12.2 oz.)
|
3/8" RSC3
|
40 to 80 cm(16" to 32")
|
25"3003 000 4030
|
#362433 RSC3 84
|
|
MS 441 C-QSTIHL Magnum™
|
70.7 cc(4.3 cu. in.)
|
4.1 kW(5.5 bhp)
|
6.7 kg(14.8 Ibs.)
|
725 cc (24.5 oz.)
|
360 cc (12.2 oz.)
|
3/8" RSC3
|
40 to 80 cm(16" to 32")
|
25"3003 000 4030
|
#362433 RSC3 84
|
|
MS 460 STIHL Magnum™
|
76.5 cc 4.7 c.i.)
|
4.5 kW(6.0 bhp)
|
6.6 kg(14.6 lbs.)
|
800 cc(27.1 oz.)
|
325 cc(11.0 oz.)
|
3/8" RMC3
|
40 to 80 cm(16" to 32")
|
25"3003 000 4030
|
#362433 RSC3 84
|
|
MS 460 R STIHL Magnum™ Rescue
|
76.5 cc 4.7 c.i.)
|
4.5 kW(6.0 bhp)
|
7.0 kg(15.4 lbs.)
|
800 cc(27.1 oz.)
|
325 cc(11.0 oz.)
|
3/8" RDR Rescue Chain
|
40 to 63 cm(16" to 25")
|
20"3003 000 9421
|
#394436 RDR-72
|
|
MS 650 STIHL Magnum™
|
84.9 cc 5.2 c.i.)
|
4.8 kW(6.4 bhp)
|
7.5 kg(16.5 lbs.)
|
825 cc(27.9 oz.)
|
360 cc(12.2 oz.)
|
3/8" RSC3
|
40 to 90 cm(16" to 36")
|
25"3003 000 4030
|
#362433 RSC3 84
|
|
MS 660STIHL Magnum™
|
91.6 cc(5.6 c.i.)
|
5.2 kW(7.0 bhp)
|
7.5 kg(16.5 lbs.)
|
825 cc(27.9 oz.)
|
360 cc(12.2 oz.)
|
3/8" RSC3
|
40 to 90 cm(16" to 36")
|
25"3003 000 4030
|
#362433 RSC3 84
|
|
MS 880STIHL Magnum™
|
121.6 cc(7.42 c.i.)
|
6.4 kW (8.6 bhp)
|
10.1 kg(22.3 lbs.)
|
1300 cc(44.0 oz.)
|
700 cc(23.7 oz.)
|
.404" RM, 3/8" RSC3
|
43 to 150 cm(17" to 59")
|
21"3002-000-9123
|
#362636 RSC3 75
|
|
Arborist Chain Saws
|
|
|
|
|
|
|
|
|
|
|
MS 192 T
|
30.1 cc(1.84 c.i.)
|
1.3 kW (1.7 bhp)
|
3.0 kg(6.6 lbs.)
|
270 cc(9.1 0z.)
|
220 cc(7.4 oz.)
|
61 PMN or 63 PM1
|
30 to 40 cm(12" to 16")
|
14"3005 000 3909
|
#398261 PMN-50
|
|
MS 200 T
|
35.2 cc(2.15 c.i.)
|
1.6 kW (2.1 bhp)
|
3.5 kg(7.7 lbs. )
|
370 cc(12.5 oz.)
|
240 cc(8.1 oz.)
|
3/8" PMC3
|
30 to 40 cm(12" to 16")
|
14"3005 000 7409
|
#363663 PMC3 50
|
|
Electric Chain Saws
|
|
|
|
|
|
|
|
|
|
|
MODEL
|
VOLTAGE
|
ENGINE POWER
|
POWERHEAD WEIGHT
|
CHAIN OIL CAPACITY
|
OILOMATIC®CHAIN
|
GUIDE BARS AVAILABLE
|
RECOMMENDEDGUIDE BAR
|
RECOMMENDED SAW CHAIN
|
|
|
MSE 140 C-BQ
|
120 volt60 Hz
|
1.4 kW (1.9 bhp)11.7 amps
|
3.3 kg(7.3 lbs.)
|
200 cc(6.8 oz.)
|
3/8" PMC3
|
30 and 45 cm(12" and 18")
|
14"3005 000 4809
|
#363663 PM1 50
|
|
|
MSE 180 C-BQ
|
120 volt60 Hz
|
1.8 kW (2.4 bhp)15 amps
|
3.5 kg(7.7 lbs.)
|
200 cc(6.8 oz.)
|
3/8" PMC3
|
30 and 45 cm(12" and 18")
|
16"3005 000 4813
|
#363663 PM1 55
|
|
|
MSE 220
|
120 volt60 Hz
|
1.7 kW (2.3 bhp)15.0 amps
|
5.0 kg(11.0 lbs.)
|
200 cc(6.8 oz.)
|
3/8" RSC3
|
40, 45, and 50 cm (16", 18", and 20")
|
16"3003 000 8913
|
#362433 RSC3 60
|
|
|
Current Models
|
Personal, Family or Household Use
|
Professional Use
|
|
|
|
|
|
Chain Saws: 009 L – MS 390
|
1 year
|
90 days
|
|
|
|
|
|
Chain Saws: MS 440, MS 441, MS 460, MS 650, MS 660, MS 880
|
90 days
|
90 days
|
|
|
|
|
|
Electric Chain Saws
|
1 year
|
90 days
|
|
|
|
|
|
Cut-Off Machines*
|
—
|
90 days
|
|
|
|
|
|
Boring Gears: BT 121, BT 45
|
2 years
|
1 year
|
|
|
|
|
|
Trimmers and Brushcutters, clearing saws, edgers, blowers and sprayers, hedge trimmers, pole pruners, KM Series, and MM 5
|
2 years
|
1 year
|
|
|
|
|
|
Gearhead and interchangeable attachments
|
2 years
|
1 year
|
|
|
|
|
|
SG 20 Sprayer
|
2 years
|
2 years
|
|
|
|
|